7,261
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − ===MICROBEAST PLUS===+ − {{WARNING_QUOTE|When updating from firmware 4.x.x or lower to Version 5.x.x you will loose all your settings. Please carefully read the Version 5 instruction manual and do the basic setup again.}}<br />+ − <br />+ − + − + − + − * added support for FlySky iBus and Jeti EXBUS serial line input data+ − + − * reworked adjustment in Receiver Menu: − − ** Receiver Menu Point A: changed LED colors for receiver types and also changed receiver type naming; see manual for further information − * reworked adjustment in Setup Menu: − ** in general values and presets are changed using the rudder stick; menu options (selecting servos, changing adjustment positions) are set with aileron; when directions are setup correctly, left stick decreases a value and right stick increases a value − ** Setup Menu Point C (Rudder pulse width): swapped LED colors for 760µs and 960µs (now 760 = purple and 960 = red) so that the values are increasing in the given order from purple (lowest) to blue (highest) − ** Setup Menu Point F (Gyro/Rudder direction): no need to check gyro direction by user anymore, instead teach the rudder direction to the system; see manual for further information − ** swapped Setup Menu Points G and H (now H = Swash servo directions and G = Swash mixing) − ** now supports up to 4 swashplate servos (when choosing 90° eCCPM swash mixing at Setup Point G and using a single wire receiver); 4th servo (2nd elevator) is connected to CH7 output − ** Setup Menu Point J (Cyclic throw): measurement and neutral positions can be selected as often as you like now, so you can even check positions after the setup was finished; see manual for furhter information − − ** Setup Menu Point M (Cyclic directions): no need to check swash gyro compensation by user anymore, instead teach the stick directions to the system; see manual for further information − * reworked settings in Parameter Menu: − ** Parameter Menu Point A (Quick trim): added collective trimming and rudder trim can be done with rudder stick now; see manual for further information − ** Parameter Menu Point L (AttitudeControl Mode): swapped LED colors for different modes (now purple = Angular mode, red = Bailout rescue, blue = 3D - Mode) − * throttle failsafe indicator (only when using Single line receiver): when throttle is higher than failsafe position and failsafe engages during power up, the system will lock throttle after initialization and the Status LED will flash red/blue!
Importing a new version from external source
==MICROBEAST PLUS==
<br />
<br />
'''5.9.4'''<br />
:* support for JETIBOX menu on JETI radios with EXBUS data protocol
'''5.0.2'''<br />
:* support for Spektrum forward programming screen on Spektrum radios with SRXL2 data protocol
:''Basic functionality''
:* added CRSF data protocol for OPENTX/EDGETX radio with TBS or ELRS receivers, i.e. Radiomaster T16s
* now fully adjustable (Setup & Parameters) also with StudioX computer software or StudioXm mobile App; see manuals for further information
:''Telemetry/PROEDITION''
:* CRSF telemetry connection at [SYS] port
* removed "User defined" presets instead you can directly edit a value with StudioX/StudioXm if necessary
:* FRSky S.Port (inverted) telemetry connection at [SYS] port
** Receiver Menu Point A: automatic receiver type detection; see manual for further information
** Setup Menu Point K (Collective pitch): no need to teach the stick end positions anymore, instead the user has to adjust the pitch range initially so the stick movement and range is shown correctly on the display; see manual for further information
<br />
<br />