Latest revision as of 10:52, 16 May 2017
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Help:FAQ:Helisetup )
==Selection in the menus with the rudder control stick does not work.== Maybe there is not enough movement or any movement at all on the rudder channel. * Check servo throw and dual rate setting for the rudder channel in the transmitter and increase the throw. * Receiver type "Standard": Check that the connector for the rudder channel (orange wire) is inserted correctly in the receiver. * Is the correct stick moved? Check stick mode of transmitter and have a look at the servo monitor. Is there any movement on the channel that you have connected the orange wire for rudder function to (Receiver type "Standard")? * Serial-wire receiver: Was the rudder channel assigned for rudder function at [[Manuals:MB_Plus:Receiver_setup_menu_B|receiver setup menu]]?<br /> <br />
==Selection in the menus with the rudder control stick does not work.==
Maybe there is not enough movement or any movement at all on the rudder channel.
* Check servo throw and dual rate setting for the rudder channel in the transmitter and increase the throw.
* Receiver type "Standard": Check that the connector for the rudder channel (orange wire) is inserted correctly in the receiver.
* Is the correct stick moved? Check stick mode of transmitter and have a look at the servo monitor. Is there any movement on the channel that you have connected the orange wire for rudder function to (Receiver type "Standard")?
* Serial-wire receiver: Was the rudder channel assigned for rudder function at [[Manuals:MB_Plus:Receiver_setup_menu_B|receiver setup menu]]?<br />
<br />
Translation ==Selection in the menus with the rudder control stick does not work.== Maybe there is not enough movement or any movement at all on the rudder channel. * Check servo throw and dual rate setting for the rudder channel in the transmitter and increase the throw. * Receiver type "Standard": Check that the connector for the rudder channel (orange wire) is inserted correctly in the receiver. * Is the correct stick moved? Check stick mode of transmitter and have a look at the servo monitor. Is there any movement on the channel that you have connected the orange wire for rudder function to (Receiver type "Standard")? * Serial-wire receiver: Was the rudder channel assigned for rudder function at [[Manuals:MB_Plus:Receiver_setup_menu_B|receiver setup menu]]?<br /> <br />
Maybe there is not enough movement or any movement at all on the rudder channel.
Check servo throw and dual rate setting for the rudder channel in the transmitter and increase the throw.
Receiver type "Standard": Check that the connector for the rudder channel (orange wire) is inserted correctly in the receiver.
Is the correct stick moved? Check stick mode of transmitter and have a look at the servo monitor. Is there any movement on the channel that you have connected the orange wire for rudder function to (Receiver type "Standard")?
Serial-wire receiver: Was the rudder channel assigned for rudder function at receiver setup menu ?