Translations:Help:FAQ:Helisetup/3/en

From BEASTX Wiki
Revision as of 10:52, 16 May 2017 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Selection in the menus with the rudder control stick does not work.

Maybe there is not enough movement or any movement at all on the rudder channel.

  • Check servo throw and dual rate setting for the rudder channel in the transmitter and increase the throw.
  • Receiver type "Standard": Check that the connector for the rudder channel (orange wire) is inserted correctly in the receiver.
  • Is the correct stick moved? Check stick mode of transmitter and have a look at the servo monitor. Is there any movement on the channel that you have connected the orange wire for rudder function to (Receiver type "Standard")?
  • Serial-wire receiver: Was the rudder channel assigned for rudder function at receiver setup menu?