Translations:Help:FAQ:Receivers/2/en

From BEASTX Wiki
Revision as of 10:50, 16 May 2017 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

SPEKTRUM receiver with SRXL signal output

I'm using firmware 3.2.0 (or greater) which is stated to support the SRXL serial wire signal but MICROBEAST PLUS does not recognize my SPEKTRUM receiver at Receiver setup menu point B (Status LED stays red).

Unfortunately the SRXL communication protocol of some SPEKTRUM receivers is not fully compatible to the SRXL specification (i.e. AR9020, AR8010T, AR9030T, AR9320T). We provide a special MICROBEAST PLUS firmware with modified SPEKTRUM SRXL protocol so that these receivers can be used anyway. You can get this firmware using the update functionality of StudioX. It has the same version number as the standard firmware but is additionally marked with the words "SPEKTRUM legacy SRXL".

Spektrum Only.png
Spektrum ar9020.png


Note: This firmware does not allow to use any other type of receiver, so Receiver setup menu point A will be skipped automatically when you enter Receiver setup menu! Otherwise this modified firmware does not differ from the default firmware.



Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Help:FAQ:Receivers/2/en&oldid=11624"