Changes

==StudioXm does not find the BLE2SYS bluetooth interface when refreshing the interface list==

==StudioXm does not find the BLE2SYS bluetooth interface when refreshing the interface list==

* Make sure bluetooth is switched on at your smartphone/tablet.

* Make sure bluetooth is switched on at your smartphone/tablet.

* Do NOT connect to the BLE2SYS device over the smartphone/tablet bluetooth menu, StudioXm establish connection by itself!

* Do NOT connect to the BLE2SYS device using the bluetooth menu of your smartphone/tablet, StudioXm will establish connection by itself!

* BLE2SYS uses bluetooth smart (bluetooth LE), make sure your mobile device supports this special bluetooth protocol.

* BLE2SYS uses bluetooth smart (bluetooth LE), make sure your mobile device supports this specific bluetooth protocol.

* Make sure the LED on the BLE2SYS flashes in intervals of 2 seconds. By default the interface deactivates after 30 seconds whe there is no connection. In this case the LED is off. You have to cylce power in order to reactivate the device.<br />

* Make sure the LED on the BLE2SYS flashes in intervals of 2 seconds. By default the interface deactivates after 30 seconds whe there is no connection. In this case the LED is off. You have to cylce power in order to reactivate the device.<br />

<br />

<br />

<br />

<br />