Translations:MICROBEAST PLUS RPM Governor - How to setup a Castle Creations ESC/1/en

From BEASTX Wiki
Revision as of 15:54, 30 March 2022 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

ESC setup (CastleLink software)

The Governor function of MICROBEAST PLUS works very well with Castle Creations ESCs. The Castle Creations Phoenix EDGE series provides a separate motor speed signal output, so despite the firmware with governor function there is nothing else needed to connect your ESC to MICROBEAST PLUS. When using a Castle Talon, ICE, ICE2 or similar ESC you additionally need to buy a rpm phase sensor, i.e.the BEASTX phase sensor BXA76013, so that MICROBEAST PLUS can detect the motor speed of your helicopter. To connect and supply the speed sensor with power you will also need the sensor adapter BX76401.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:MICROBEAST_PLUS_RPM_Governor_-_How_to_setup_a_Castle_Creations_ESC/1/en&oldid=19351"