Changes

=Attaching your Microbeast PLUS to the helicopter=

=Attaching your Microbeast PLUS to the helicopter=

Attach the Microbeast PLUS unit by using one of the provided 3M® gyropads at a preferably low vibrating position on your helicopter such as the gyro platform or receiver platform. You may need to choose another type of mounting pad depending on the vibration pattern of your helicopter.

Attach the MICROBEAST PLUS gyro by using one of the provided 3M® gyropads at a preferably low vibrating position on your helicopter such as the gyro platform or receiver platform. You may need to choose another type of mounting pad depending on the vibration pattern of your helicopter.

<p>

<p>

There are eight possible mounting orientations: The MICROBEAST PLUS unit either can be attached '''flat or upright''' on the helicopter and the '''servo connector pins must always point towards the front or rear''' of the helicopter. The small white sensor pinboard on the side must always be inline with flight direction:</p>

There are eight possible mounting orientations: The MICROBEAST PLUS unit either can be attached '''flat or upright''' on the helicopter.  The '''servo connector pins must always point towards the front or rear''' of the helicopter. The small white sensor pinboard on the side must always be inline with flight direction:</p>

<div class="noprint">

<div class="noprint">

{| cellspacing="20" style="text-align: center; width: 300px; font-size: 70%;"

{| cellspacing="20" style="text-align: center; width: 300px; font-size: 70%;"

</div>

</div>

<br />

<br />

{{QUOTE|[[File:Warning.png|18px|sub]] '''Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding rotational axes of the helicopter!''' Especially make sure that the mounting platform is perpendicular to the main shaft! On the other hand it is not important that the unit is directly placed on the rotation axis (which is nearly impossible) and also it is not important whether the system is placed in parallel to the ground or not.}}<br />

{{QUOTE|[[File:Warning.png|18px|sub]] '''Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding rotational axes of the helicopter!''' Especially make sure that the mounting platform is perpendicular to the main shaft!<br />

It is '''not important''' that the unit is directly placed above the rotation axis (which is nearly impossible). Also it doesn't matter whether the system is placed in parallel to the ground or not.}}<br />

<br />

<br />

{{NL}}

{{NL}}