Changes

* The single-line connection wire is plugged into the [DI1] input of MICROBEAST PLUS

* The single-line connection wire is plugged into the [DI1] input of MICROBEAST PLUS

* The throttle servo or ESC is connected to the [CH5] output. When using a speed controller with BEC, from here the power will be distributed to receiver and servos.

* The throttle servo or ESC is connected to the [CH5] output. When using a speed controller with BEC, from here the power will be distributed to receiver and servos.

* Alternatively or additionally you can connect a power supply/second BEC wire/buffering battery to the [SYS] port and/or to the receiver (in case this has additional servo or battery ports). All servo ports will form a parallel power circuit.

* Alternatively or additionally you can connect a power supply/second BEC wire/buffering battery to the [SYS] port and/or to the receiver (in case this has additional servo or battery ports). All servo ports will form a parallel power circuit.<br />

{|cellspacing="20" style="text-align:center;"

{|cellspacing="20" style="text-align:center;"

|[[Image:Singleline_RX_3.png | x150px]]

|[[Image:Singleline_RX_3.png | x150px]]

|- style="text-align:center; font-size:75%;"

|- style="text-align:center; font-size:75%;"

| Wiring layout for single-line receivers

| Single-line receiver<br /> with additional servo output channels

| Alternative wiring layout for single-line receiver<br /> with additional servo output channels

|}

|}

<br />

<br />