Translations:Manuals:MBPlusFblV52:Setupmenu B/5/en

From BEASTX Wiki
Revision as of 13:04, 20 October 2020 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Adjustment on the device

To select the desired servo frequency move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point B:

Status-LED Swashplate servo frequency
purple 50 Hz
red flashing 65 Hz
red 120 Hz
blue flashing 165 Hz
blue 200 Hz


Note: When you set a different frequency using the StudioX or StudioXm App the Status LED will be off. You can change back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!