Translations:Manuals:MBPlusFblV5:FactoryReset/2/en

In the following we will describe how to reset your device to factory settings. This sets all parameters and settings to the default values as mentioned in the manual and shown on the MICROBEAST PLUS quick reference card (marked with a * there).

Please note: The factory reset will not change your receiver settings (receiver type, function assignments, failsafe settings). This simply can be changed by doing the receiver setup procedure in Receiver Menu again.

In case your system does not pass initialization sequence you will not be able to perform factory reset (as you need to do this in Setup Menu which is accessed from Operation mode. But doing so will not solve this problem anyway! When you can't pass radio system initialization sequence make sure to perform Receiver Menu setup completely!