Translations:Manuals:MBPlusFblV5:Hardware Installation/2/en

From BEASTX Wiki
Revision as of 10:13, 13 November 2017 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Attaching your Microbeast PLUS to the helicopter

Attach the Microbeast PLUS unit by using one of the provided 3M® gyropads at a preferably low vibrating position on your helicopter such as the gyro platform or receiver platform. You may need to choose another type of mounting pad depending on the vibration pattern of your helicopter.

There are eight possible mounting orientations: The MICROBEAST PLUS unit either can be attached flat or upright on the helicopter and the servo connector pins must always point towards the front or rear of the helicopter. The small white sensor pinboard on the side must always be inline with flight direction:

450 flat.jpg 450 upright.jpg
Orient1.jpg
flat, cover on top, servo connectors showing to front 		Orient3.jpg
flat, cover showing to bottom, servo connectors showing to front 		Orient2.jpg
upright, button on top, servo connectors showing to front 		Orient4.jpg
upright, button on bottom, servo connectors showing to front
Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBPlusFblV5:Hardware_Installation/2/en&oldid=12276"