7,241
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + − +
Translations:Manuals:MBPlusFblV5:ReceiverType/26/en (view source)
Revision as of 15:19, 9 July 2019
, 4 years agoImporting a new version from external source
==Point N - Throttle failsafe==
==Throttle failsafe==
After you've set the control functions you will reach Menu Point N to program the failsafe position for the throttle channel. In case the single-line signal is interrupted during operation the throttle servo/speed controller connected to the [CH5] Output is automatically moved to this position. This particularly is the case:
After you've set the control functions you will be asked to program the failsafe position for the throttle channel. In case the single-line signal is interrupted during operation, the throttle servo/speed controller connected to the [CH5] Output is automatically moved to this position. This particularly is the case:
* if using a single-line receiver that turns of the single-line signal in case of signal loss between receiver and transmitter (e.g. Spektrum® satellite receiver or Graupner® receiver in „SUMDOF“ mode)
* if using a single-line receiver that turns of the single-line signal in case of signal loss between receiver and transmitter (e.g. Spektrum® satellite receiver or Graupner® receiver in „SUMDOF“ mode)
* if the connection between MICROBEAST PLUS and receiver gets disconnected
* if the connection between MICROBEAST PLUS and receiver gets disconnected