Translations:Manuals:MBPlusFblV5:ReceiverType/6/en

From BEASTX Wiki
Revision as of 15:01, 15 November 2017 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Default function assignment

Refer to the tables below and identify the column that represents your receiver type. Check whether your radio transmits the channels in the given order respectively each stick function on the radio is transmitted using the specified channel number on the left. To know the channel assignment of your transmitter you can check the user manual of the transmitter or look at the servo monitor of the transmitter. In order to load the preset channel assignment hold down the button for at least 2 seconds and release. The yellow Menu-LED will immediately jump to Menu Point N.

*Channel designation of Spektrum® transmitters:

1 2 3 4 5 6 7 8 9
THROTTLE AILERON ELEVATOR RUDDER GEAR AUX1 AUX2 AUX3 AUX4

**AttitudeControl only applicable with MICROBEAST PLUS PROEDITION firmware. When using a different firmware this channel by default controls CH6 Output.