Changes

=Adjustment on the device=

=Adjustment on the device=

By tapping the aileron stick you can select one servo after another. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. Tap the rudder stick once to change the servo direction. You can switch back and forth between the servos as often as you need.<br />

By tapping the '''aileron''' stick you can '''select one servo after another'''. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. Tap the '''rudder''' stick once to '''reverse the servo direction'''. You can switch back and forth between the servos as often as you need.<br />

<br />

<br />

{|cellpadding="4" cellspacing="0" border="1"

{|cellpadding="4" cellspacing="0" border="1"

|style="color:white; background-color:#FF3300" | red ||CH2 – aileron(1) servo

|style="color:white; background-color:#FF3300" | red ||CH2 – aileron(1) servo

|-

|-

| style="color:white; background-color:#0066FF" | blue || CH3 – aileron(2)

| style="color:white; background-color:#0066FF" | blue || CH3 – aileron(2) <!-- no pitch servo as this step is not provided for mCCPM! -->

|-

|-

| style="color:white; background: linear-gradient(to right, #FF3300, black, #0066FF)" | red/blue || CH7 – elevator servo(2) (90° eCCPM only)

| style="color:white; background: linear-gradient(to right, #FF3300, black, #0066FF)" | red/blue || CH7 – elevator servo(2) (90° eCCPM only)