7,261
edits
Changes
Jump to navigation
Jump to search
Line 17:
Line 17: − <br /> − <br /> − '''ESC connection''' − * When telemetry is not in use, the throttle servo or ESC is connected to the '''[IO2]''' output. − * When using a telemetry receiver and an ESC with telemtry data connector, the ESC is connected to the '''[IO1]''' output. The data signal of the ESC is connected to '''[IO2]''' input. (You will get further information about connecting the speed controller and setting up telemetry on the next page!) − * You can connect a power supply (second BEC wire, battery) to the [SYS] port and/or to the receiver (in case this has additional servo or battery ports). All servo ports will form a parallel power circuit (except the port [RUD|PIT|AUX]; please do not connect anything here!).<br /> − <br /> '''When using a big heli with standard size servos it may be insufficient to only provide power at the [SYS] port or receiver.''' Adding additional power wires is highly recommended! If there are no other ports left to additionally feed in power, we recommend using the MICROBEAST PLUS HD which comes witch an additional high power input. This reduces wiring resistance and serves todays demands for a robust servo power supply.<br />
Translations:Manuals:MBUltraFblV5:Radio System/14/en (view source)
Revision as of 13:10, 23 March 2023
, 1 year agoImporting a new version from external source
|}
|}
{{WARNING_QUOTE|'''Never connect the 4-pin receiver connector to MICROBEAST ULTRA without modification and in wrong polarity! This will damage your receiver immediately!''' Check polarity at least twice before connecting the receiver to MICROBEAST ULTRA . It is up to you to make sure polarity is correct. We do not assume any liability in case you do it wrong.}}<br />
{{WARNING_QUOTE|'''Never connect the 4-pin receiver connector to MICROBEAST ULTRA without modification and in wrong polarity! This will damage your receiver immediately!''' Check polarity at least twice before connecting the receiver to MICROBEAST ULTRA . It is up to you to make sure polarity is correct. We do not assume any liability in case you do it wrong.}}<br />
<br />
<br />
<br />
<br />