Difference between revisions of "Translations:Manuals:MBUltraFblV5:Radio System/19/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
 
== Single wire with telemetry ==
 
== Single wire with telemetry ==
−
When using a telemetry receiver and an ESC with telemetry data connector, the ESC is connected to the '''[IO1]''' output. The telemetry data signal of the ESC is connected to '''[IO2]''' input. (You will get further information about connecting the speed controller in a later section!)<br />
+
When using a telemetry receiver and an ESC with telemetry data connector, the ESC is connected to the '''[IO1]''' output. The telemetry data signal of the ESC is connected to '''[IO2]''' input.<br />
 +
<br />
 +
Spektrum® AVIAN ESC do not have a separate line for telemetry data. Here motor control and telemetry data is sent bidirectional on the main connection wire. For this we must connect the AVIAN ESC to the [SYS] port of MICROBEAST ULTRA, as the other connectors [IO1] and [IO2] can only work in one direction.<br />
 +
<br />
 +
You will get further information about connecting and setting up the speed controller in a later section!<br />
 
<br />
 
<br />

Latest revision as of 13:40, 23 March 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBUltraFblV5:Radio System)
== Single wire with telemetry ==
When using a telemetry receiver and an ESC with telemetry data connector, the ESC is connected to the '''[IO1]''' output. The telemetry data signal of the ESC is connected to '''[IO2]''' input.<br />
<br />
Spektrum® AVIAN ESC do not have a separate line for telemetry data. Here motor control and telemetry data is sent bidirectional on the main connection wire. For this we must connect the AVIAN ESC to the [SYS] port of MICROBEAST ULTRA, as the other connectors [IO1] and [IO2] can only work in one direction.<br />
<br />
You will get further information about connecting and setting up the speed controller in a later section!<br />
<br />
Translation== Single wire with telemetry ==
When using a telemetry receiver and an ESC with telemetry data connector, the ESC is connected to the '''[IO1]''' output. The telemetry data signal of the ESC is connected to '''[IO2]''' input.<br />
<br />
Spektrum® AVIAN ESC do not have a separate line for telemetry data. Here motor control and telemetry data is sent bidirectional on the main connection wire. For this we must connect the AVIAN ESC to the [SYS] port of MICROBEAST ULTRA, as the other connectors [IO1] and [IO2] can only work in one direction.<br />
<br />
You will get further information about connecting and setting up the speed controller in a later section!<br />
<br />

Single wire with telemetry

When using a telemetry receiver and an ESC with telemetry data connector, the ESC is connected to the [IO1] output. The telemetry data signal of the ESC is connected to [IO2] input.

Spektrum® AVIAN ESC do not have a separate line for telemetry data. Here motor control and telemetry data is sent bidirectional on the main connection wire. For this we must connect the AVIAN ESC to the [SYS] port of MICROBEAST ULTRA, as the other connectors [IO1] and [IO2] can only work in one direction.

You will get further information about connecting and setting up the speed controller in a later section!

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBUltraFblV5:Radio_System/19/en&oldid=21995"