Difference between revisions of "Translations:Manuals:MBUltraFblV5:Radio System/21/de"

From BEASTX Wiki
Jump to navigation Jump to search
(Created page with "== Graupner HOTT telemetry == When using a Graupner HOTT receiver with telemetry uplink, the throttle servo or ESC is connected to the '''[IO2]''' output. The telemetry data s...")
(No difference)

Revision as of 13:14, 23 March 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBUltraFblV5:Radio System)
== Graupner HOTT telemetry ==
When using a Graupner HOTT receiver with telemetry uplink, the throttle servo or ESC is connected to the '''[IO2]''' output. The telemetry data signal of the ESC is connected at the side input of MICROBEAST ULTRA. Here "-" (minus)  is the second pin from front and "S" (signal) is the third pin from front. "+" (plus) can be connected at the first pin from behind.<br />
<br />
Translation== Graupner HOTT telemetry ==
When using a Graupner HOTT receiver with telemetry uplink, the throttle servo or ESC is connected to the '''[IO2]''' output. The telemetry data signal of the ESC is connected at the side input of MICROBEAST ULTRA. Here "-" (minus)  is the second pin from front and "S" (signal) is the third pin from front. "+" (plus) can be connected at the first pin from behind.<br />
<br />

Graupner HOTT telemetry

When using a Graupner HOTT receiver with telemetry uplink, the throttle servo or ESC is connected to the [IO2] output. The telemetry data signal of the ESC is connected at the side input of MICROBEAST ULTRA. Here "-" (minus) is the second pin from front and "S" (signal) is the third pin from front. "+" (plus) can be connected at the first pin from behind.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBUltraFblV5:Radio_System/21/de&oldid=21957"