Bureaucrats, Administrators, translate-proofr
15,511
edits
Changes
Jump to navigation
Jump to search
Translations:Manuals:MBUltraFblV5:TelemetryInfo/7/de (view source)
Revision as of 14:26, 23 March 2023
, 1 year agoCreated page with "= Futaba SBUS2 = Make sure you receiver is set up to send SBUS2 telemetry data. Usually this is done from the LINKAGE MENU of your Futaba radio. Sometimes it is necessary to p..."
= Futaba SBUS2 =
Make sure you receiver is set up to send SBUS2 telemetry data. Usually this is done from the LINKAGE MENU of your Futaba radio. Sometimes it is necessary to perform a rebind, in order to activate the telemetry output!<br />
<br />
In the SENSOR menu activate the following devices:<br />
* SLOT 8: rpm sensor (=headspeed)
* SLOTs 9-10-11: CUR-1678 (=voltage, current, consumption)
* SLOT 12: TEMP-1713 (=ESC temperature)
* SLOT 13: TEMP-1713 (=PWM)
<br />
Please note this assignment is fixed. If you use additional sensors on the same slots, these must be reassigned to other slots.<br />
<br />
You can add alarms to each item in the TELEMETRY menu. Please refer to the instructions manual of your radio for further reference.<br />
<br />
<br />
Make sure you receiver is set up to send SBUS2 telemetry data. Usually this is done from the LINKAGE MENU of your Futaba radio. Sometimes it is necessary to perform a rebind, in order to activate the telemetry output!<br />
<br />
In the SENSOR menu activate the following devices:<br />
* SLOT 8: rpm sensor (=headspeed)
* SLOTs 9-10-11: CUR-1678 (=voltage, current, consumption)
* SLOT 12: TEMP-1713 (=ESC temperature)
* SLOT 13: TEMP-1713 (=PWM)
<br />
Please note this assignment is fixed. If you use additional sensors on the same slots, these must be reassigned to other slots.<br />
<br />
You can add alarms to each item in the TELEMETRY menu. Please refer to the instructions manual of your radio for further reference.<br />
<br />
<br />