Changes

===Firmware version display - Version 4.x.x===

===Firmware version display===

'''Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 4.x.x!'''<br />

<p>'''Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 4.x.x!'''</p>

The firmware version can be detected by connecting the unit to a computer by using the USB2SYS  

<p>The firmware version can be detected by connecting the unit to a computer by using the USB2SYS  

interface together with the StudioX software bundle .Also you can directly read on the MICROBEAST

interface together with the StudioX software bundle. During initialization also you can directly read from the display of the device what firmware version it is running:

PLUS unit during the initialization phase what firmware version your MICROBEAST PLUS is running:

MICROBEAST PLUS first carries out a brief LED test by lighting up all Menu-LEDs simultaneously, and  

MICROBEAST PLUS first carries out a brief LED test by lighting up all Menu-LEDs simultaneously, and  

cycling the Status-LED color (red->blue->purple). Then for about 3 seconds, the Status-LED lights red  

cycling the Status-LED color (red->blue->purple). Then for about 3 seconds, the Status-LED lights red  

while the Menu-LEDs A to G display the first digit of the firmware version, and the LEDs H to N the  

while the Menu-LEDs A to G display the first digit of the firmware version, and the LEDs H to N the  

second digit of the firmware version. By briefly pushing the button you can get more version informations displayed. In respect to the  

second digit of the firmware version in binary format. By briefly pushing the button you can get more version informations displayed. In respect to the  

manual this information is not important. You will get more information about the version display in

manual this information is not important.</p>

chapter 11.<br />

<br />

<br />