<p>'''Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 4.x.x!'''</p>
<p>'''Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 4.x.x!'''</p>
<p>The firmware version can be detected by connecting the unit to a computer by using the USB2SYS
<p>The firmware version can be detected by connecting the unit to a computer by using the USB2SYS
−
interface together with the StudioX software bundle .Also you can directly read on the MICROBEAST
+
interface together with the StudioX software bundle. During initialization also you can directly read from the display of the device what firmware version it is running:
−
PLUS unit during the initialization phase what firmware version your MICROBEAST PLUS is running:
MICROBEAST PLUS first carries out a brief LED test by lighting up all Menu-LEDs simultaneously, and
MICROBEAST PLUS first carries out a brief LED test by lighting up all Menu-LEDs simultaneously, and
cycling the Status-LED color (red->blue->purple). Then for about 3 seconds, the Status-LED lights red
cycling the Status-LED color (red->blue->purple). Then for about 3 seconds, the Status-LED lights red