Changes

|CH 2 – aileron(1) servo center trim adjust

|CH 2 – aileron(1) servo center trim adjust

|CH 3 – aileron(2)/pitch servo center trim adjus

|CH 3 – aileron(2)/pitch servo center trim adjus

}}<br />

}}

<br />

{{QUOTE|Only the trimmed servo positions are important and get stored (those which have been set with the corresponding Status-LED colors). The servo positions at '''Status-LED off''' only serve for reference and to get the servo horns best plugged into position, for instance if you install new servos or replace the servo gears after a crash. This reference position will not be used later onwards. '''Only the servo positions with active trimming are important.'''}}<br />

{{QUOTE|Only the trimmed servo positions are important and get stored (those which have been set with the corresponding Status-LED colors). The servo positions at '''Status-LED off''' only serve for reference and to get the servo horns best plugged into position, for instance if you install new servos or replace the servo gears after a crash. This reference position will not be used later onwards. '''Only the servo positions with active trimming are important.'''}}<br />

<br />

<br />

[[Image:Swashdriver_2.png|600px|none|border]]<br />

[[Image:Swashdriver_2.png|600px|none|border]]<br />

<br />

<br />

Push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Setupmenu_H|Setup menu point '''H''']].

Push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Setupmenu_H|Setup menu point '''H''']].