Translations:StudioXm/7/en

From BEASTX Wiki
Revision as of 13:36, 8 November 2018 by FuzzyBot (talk | contribs) (Importing a new version from external source)
Jump to navigation Jump to search

After installation of the StudioX software bundle Windows should install the correct drivers when the USB2SYS / SPMA3030 interface is plugged in the PC for the first time or when the RX2SIM Multi-Sim Adapter is switched to USB2SYS emulation mode (push button repeatedly until LED lights yellow, see RX2SIM manual). Check the notifications of your Windows system:

noframe
noframe



If you did not see any message popping up at all, check you Windows device manager if the interface driver has been installed correctly. To access the device manager under windows type devmgmt.msc in the Startmenu's search bar or simply enter Device manager. You must be able to find following entry:

noframe
noframe
The name COM3 may be different on your PC. This entry must disappear when you disconnect the Interface from the PC and re-appear when you connect it again. If there is only an entry marked with an yellow "!" something went wrong and you have to install the driver files manually.


In case the drivers did not install correctly please see the USB2SYS driver installation guide.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:StudioXm/7/en&oldid=16607"