Translations:Studiox microbeast plus plugin/13/en

From BEASTX Wiki
Revision as of 16:04, 17 November 2015 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Advanced plug-in configuration

From the StudioX main menu, open "Edit" then "Configure plug-ins..." to show the plug-in Configuration dialog.
Select "MICROBEAST PLUS" from the list:

Mb config dlg.png

Serial Port Control

By default the MICROBEAST PLUS plug-in will continuously try to query all serial interfaces (the USB2SYS/SPMA3030-Interface is a serial interface) to check if a MICROBEAST PLUS is connected somewhere.
Sometimes it is useful to limit the ports that the plug-in is trying to query, i.e. in case a port is blocking the plug-in. Therefore you can choose from one of the following options:

  • Use all ports, except those selected
  • Only use selected ports

Use the entries in the list below to refine your selection. The plug-in will only try to query ports which match the selected rule.

Device Discovery

This specifies the interval time which is used to try identifying newly connected devices. This should not be modified if the mechanism is working properly.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Studiox_microbeast_plus_plugin/13/en&oldid=9456"