Update request
Revision as of 14:20, 26 August 2014 by Shornstein (talk | contribs) (Marked this version for translation)
Update files for MICROBEAST, Trajectory and AR7200BX will be created exclusively for your device and mailed to the given address! To request an update the serial number for the device is necessary. Please have a look here, if you don't know where to find the serial number. The update files can be uploaded to the unit by using the update functionality of StudioX.
Updating MICROBEAST PLUS can be directly done from within StudioX.
MICROBEAST PLUS
Current firmware version available: 3.1.3 * Bugfix: receiver channel initialisation could cause unit to start without stick control
MICROBEAST
Request Updates Files for the MICROBEAST here
Current firmware version available: 3.0.12
* Supports Graupner HOTT SUMD serial line signal * Improved receiver channel initialization * Improved tailgyro algorithm for normal (rate) mode
Trajectory
Request Updates Files for the Trajectory here
AR7200BX
Request Updates Files for the AR7200BX here