Translations:Help:FAQ:FlightPerformance/8/en

From BEASTX Wiki
Jump to navigation Jump to search

Status-LED flashes in operation mode, i.e. after landing.

The flashing Status-LED shows that a software-reset occurred during operation. This can have different reasons:

  • The receiver power supply does not seem to be sufficient. The voltage during operation dropped in a critical area (<3.5 Volts). Use a stable power supply and make sure that the wiring and plugs are dimensioned big enough and feature low contact resistance. On large helicopters we recommend to use the MICROBEAST PLUS HD with high power input.
  • A reset can be triggered due to a transfer of high voltage. Take measures to prevent static discharges.


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Help:FAQ:FlightPerformance/8/en&oldid=11660"