Translations:Help:FAQ:General/22/en

From BEASTX Wiki
Jump to navigation Jump to search

5.8.3

Telemetry/PROEDITION
  • bugfix for Kontronik JIVE LV/HV and YGE Texy telemetry


5.8.1

Telemetry/PROEDITION
  • added telemetry data processing for OMP 65A ESC (OMP M4 heli)


5.7.0

Telemetry (optional/PROEDITION)
  • added telemetry data processing for YGE ESC(YGE TEXY protocol)
  • added telemetry data processing for Spektrum AVIAN Smart ESC (must be connected at SYS port)
  • added telemetry data input for Graupner HOTT receivers (telemetry line must be connected at SYS port)
  • capacity correction value now can be used in combination with any telemetry ESC if needed


5.5.2

Telemetry (optional/PROEDITION)
  • added telemetry data processing for Scorpion Tribunus II 14-200 ESC


5.5.1

Telemetry (optional/PROEDITION)
  • added telemetry data processing for Hobbywing Platinum V5 ESC


5.4.0

Telemetry (optional/PROEDITION)
  • added SRXL2 and EXBUS telemetry output
  • added telemetry data processing for Hobbywing Platinum V4, Kontronik Jive/Kosmik and Scorpion Tribunus ESCs


5.2.4

AttitudeControl rescue (optional/PROEDITION)
  • added option for automatic rescue deactivation when helicopter reaches level position


Setup
  • menu point ordering has changed in SETUP MENU (H = servo reverse, I = stick directions, J = servo trim, K = cyclic throw, L = collective, M = swash limit)!
  • added swashplate trim option to the trim menu at SETUP MENU Point J


Receivers
  • added SRXL2 receiver protocol, can be connected at white pin board on the side
  • added option to connect iBus remote receiver (comes with ALIGN T-Rex 300X)
  • made ready for telemtry support (coming soon..)


StudioX
  • added help buttons to display help text only when needed
  • added screen stacks for adjustment buttons for clearer display layout on smartphones