Translations:Manuals:AR7210FblV5:Setupmenu intro/5/en

From BEASTX Wiki
Jump to navigation Jump to search

Factory reset
When in SETUP MENU you can reset all settings of the device to their factory default value. To do so hold down the button at any menu point of SETUP MENU for at least 10 seconds, then release. After doing so you will not be able to fly anymore! You have to do all the basic heli setup again and also all the other settings from PARAMETER MENU will be reset!! There are 3 exceptions:

  • When you press down and hold the button at Menu Point H (Servo trims) only the servo trims will be reset to 0. Holding the button will not cause a full factory reset here.
  • For the settings of FUNCTION MENU there is no such factory reset intended. To change receiver output function assignment simply perform the setup of FUNCTION MENU again.
  • The throttle Fail Safe/Smart Safe position can only be changed by performing the bind sequence.


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:AR7210FblV5:Setupmenu_intro/5/en&oldid=15731"