Translations:Manuals:MBPlusFblV5:Setupmenu J/4/en

Setup with StudioX

To activate the cyclic throw adjustments click the Adjust button in the corresponding table row (when using the Wizard function this will be done automatically when you click the Next button after adjusting Menu Point J).

Initially the swashplate will be leveled and rotorblades will have 0 degrees of pitch. Attach your pitch gauge at the rotorblade or blade grip, calibrate it to 0 degrees and then click the Measure button. This will move the rotorblade into measuring position. Now check the pitch gauge, we want to see exactly +-6.0 degrees. Increase/decrease the value in the box until the pitch is adjusted correctly. Then click the Save button or Next button (when using the Wizard function) and proceed with the setup.