StudioXm: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
← Older edit
No edit summary
Marked this version for translation
 
(41 intermediate revisions by the same user not shown)
Line 7: Line 7:


<!--T:4-->
<!--T:4-->
StudioX / StudioXm is the app that allows to fully configure your MICROBEAST PLUS, Spektrum AR7210BX and NANOBEAST (coming soon). You can use it to do all the configuration from the computer or smartphone, to backup settings, load preconfigured setups and do a lot more. The PC/mac software can also be used to update and configure your BLE2SYS bluetooth smart interface which is used to connect your BEASTX device with the smartphone.<br />
StudioX allows to fully configure your MICROBEAST/MICROBEAST PLUS/MICROBEAST ULTRA, Spektrum AR7210BX and NANOBEAST. You can use it to do all the configuration from the computer or smartphone, to backup settings, load preconfigured setups and do a lot more. In addition you can perform some basic adjustments on older devices like MICROBEAST and Spektrum AR7200BX/AR7300BX.<br />
<br />
<br />
{{MINIQUOTE|<p>Please note for older devices like '''MICROBEAST, AR7200, AR7300 you must use StudioX Version 2.2.x!''' Instructions for the old StudioX can be found by [[StudioX/en|clicking here]]. You can install both Versions (StudioX 2 and StudioX 3 ) in parallel on you computer!</p>
{{SHORT_QUOTE|width=70|margin=10|Please make sure to always use the latest version in order to be compatible with latest device firmware updates!}}<br />
<p>The '''Spektrum AR7210BX receiver''' needs to be updated to firmware version 5.x.x in order to be used with StudioX. This is a paid upgrade because when the device was sold initially, it was not designed to be able to adjust it by software! So if you like to have this option we ask for a little fee from you. You can buy the firmware update from inside the StudioX software or from the [https://www.freakware.de/beastx/software-updates-w19629 freakware webshop]. For other devices the firmware update to version 5.x.x and use of StudioX is for free.</p>}}<br />
<br />
<br />
<br />
<br />


= Windows PC/mac and USB2SYS computer interface = <!--T:5-->
<!--T:2-->
If not already done you can get the latest version of StudioX here:<br />
= Smartphone/tablet =
If not already done, download and install the latest version of StudioXm from the Apple iTunes Store or GooglePlay Store:<br />
<br />
<br />
[http://studiox.beastx.com/download/latest.php?os=win <img src="http://www.beastx.com/deu/support_files/studiox_win.jpg" alt="" height="25" /> StudioX 3.x for Windows]<br />
<html>
    <style>
        .banner-container {
            display: flex;
            align-items: center;
            justify-content: center; /* Zentriert die Banner im Container */
            gap: 120px; /* Abstand zwischen den Bannern */
        }
        .banner-link {
            display: inline-block;
            text-decoration: none; /* Entfernt die Unterstreichung des Links */
        }
        .banner-link img {
            display: block; /* Entfernt unerwünschte Abstände unter dem Bild */
        }
    </style>
    <div class="banner-container">
        <!-- App Store Banner -->
        <a href="https://itunes.apple.com/us/app/studioxm/id1145413743?ls=1&mt=8" class="banner-link" target="_blank">
            <img src="https://www.beastx.com/deu/data/uploads/images/Download_on_the_App_Store_Badge_US-UK_135x40.svg" alt="Download on the App Store" />
        </a>
        <!-- Google Play Banner -->
        <a href="https://play.google.com/store/apps/details?id=com.freakware.StudioXm" class="banner-link" target="_blank">
            <img src="https://play.google.com/intl/en_us/badges/images/generic/en_badge_web_generic.png" alt="Get it on Google Play" width="150" />
        </a>
    </div>
</html>
<br />
<br />
[http://studiox.beastx.com/download/latest.php?os=mac <img src="http://www.beastx.com/deu/support_files/studiox_mac.jpg" alt="" height="25" /> StudioX 3.x for macOS]<br />
 
<!--T:9-->
'''Make sure to give the App privileges for using the bluetooth connection and to write data to the internal storage.'''<br />
With iOS you will be asked to grant privileges at first start up. On Android devices sometimes it may be necessary to do this manually in the application settings! (When the StudioX App is not allowed to write to the internal storage, your user specific settings won't be saved, i.e. language and port settings, device names, storing RestorePoints, etc.) Also make sure to allow the App access your internet connection in case you want to download firmware update files for your device. Note this may produce extra costs when using your mobile data connection!<br />
<br />
To connect your BEASTX controller with your smartphone/tablet the BLE2SYS bluetooth smart interface is required. This is plugged into your device's SYS port and is used to establish a wireless communication to the phone.
{|class="gallery"
|[[File:Ble2sys.jpg|none|200px]]
|}<br />
<br />
 
<!--T:5-->
= Windows PC/mac =
If not already done you can get StudioX here:<br />
<br />
[https://www.beastx.com/eng/index.php?id=support BEASTX website]<br />
<br />
<br />
The setup procedure is easy and works as usual. On (older) Windows systems you may get a note that vcredist_x86.exe is missing on your computer. In this case please install the Microsoft Visual C++ 2015 Redistributable Package (even if you have installed any Microsoft Visual C++ package on you computer you may need this specific version!). You can get this from the Microsoft website or by using the Windows Update functionality.<br />
<br />
<br />


<!--T:6-->
To connect your BEASTX device to the computer you need one of the following USB interfaces:<br />
To connect your BEASTX device to the computer you need one of the following USB interfaces:<br />
<br />
<br />
Line 36: Line 77:
|}<br />
|}<br />


After installation of the StudioX software bundle Windows should install the correct drivers when the USB2SYS / SPMA3030 interface is plugged in the PC for the first time or when the RX2SIM Multi-Sim Adapter is switched to USB2SYS emulation mode (push button repeatedly until LED lights yellow, see RX2SIM manual). Check the notifications of your Windows system:
<!--T:13-->
Since Version 15.7.0 you can also use the BLE2SYS interface for a wireless connection to your BEASTX device (only in combination with macOS or Windows 10/11 64-bit versions!). On the computer side a built-in or external bluetooth module (Bluetooth 5.0 compatible or better) is required. If your computer doesn't have a bluetooth module, you can get cheap bluetooth 5.0 USB sticks from your local hardware store.<br />
<br />
{|class="gallery"
|[[File:Ble2sys.jpg|none|200px]]
|}<br />
<br />
<br />
 
<!--T:14-->
==Windows installation==
The setup procedure is easy and works as usual. After installation of the StudioX software bundle, Windows should install the correct drivers automatically when the USB2SYS / SPMA3030 interface is plugged in the USB port for the first time. When using the RX2SIM Multi-Sim Adapter, drivers should install as soon as it is switched to USB2SYS emulation mode (push button repeatedly until LED lights yellow, see RX2SIM manual). Check the notifications of your Windows system:
{|class="gallery"
{|class="gallery"
|[[File:Driver install.png|x50px|noframe|none]]
|[[File:Driver install.png|x50px|noframe|none]]
Line 42: Line 94:
|}<br />
|}<br />
<br />
<br />
If you did not see any message popping up at all, check you Windows device manager if the interface driver has been installed correctly. To access the device manager under windows 7 type devmgmt.msc in the Startmenu's search bar or simply enter '''Device manager'''.
If you did not see any message popping up at all, check you Windows device manager if the interface driver has been installed correctly. To access the device manager under windows type devmgmt.msc in the Startmenu's search bar or simply enter '''Device manager'''.
You must be able to find following entry:<br />
You must be able to find following entry:<br />
{|class="gallery"
{|class="gallery"
Line 52: Line 104:
|}
|}
<br />
<br />
 
In case the drivers did not install correctly please install the SiLabs CP210x VCP drivers from here: [https://studiox.beastx.com/download/win/CP210x_VCP_Windows.zip SiLabs driver package (Windows)].<br />
Now start StudioX. When the USB2SYS is connected to the computer make sure the corresponding port is selected in the selection box in the middle of the screen. If you have connected it after starting the software, click the RESCAN button above to refresh the port list, usually the correct port will be selected automatically then. If you don't know which port is the right one, also you can disconnect the USB2SYS once again, click RESCAN to clear the port list, connect the USB2SYS, wait a few seconds and click RESCAN once more. Now the port should be selected. Then connect the USB2SYS interface to the [SYS] port of your BEASTX device and power it up. Click CONNECT to load the data from your device and to enter configuration menus.<br />
<br />
'''When the device does not appear once again check driver installation and port configuration as shown above.'''<br />
<br />
<br />
<br />
<br />


= Smartphone/tablet and BLE2SYS bluetooth interface = <!--T:2-->
<!--T:7-->
If not already done download and install the latest version of StudioXm from the Apple iTunes Store or GooglePlay Store:<br />
==macOS installation==
<br />
When opening the StudioX .pkg file you may get a message that installation is not allowed. In this case please click the .pkg file with the '''right mouse button'''. Then choose "Open". Now you will see the similar message but this time you can choose "Open".
{|
|width="300pt" | [https://itunes.apple.com/us/app/studioxm/id1145413743?ls=1&mt=8 <img src="http://www.beastx.com/eng/support_files/Download_on_the_App_Store_Badge_US-UK_135x40.svg" alt="" /> StudioXm for iOS]
|[https://play.google.com/store/apps/details?id=com.freakware.StudioXm <img src="https://play.google.com/intl/en_us/badges/images/generic/en_badge_web_generic.png" alt="" width = "150"/> StudioXm for Android]
|}<br />
 
Make sure to give the App privileges for using the bluetooth connection and to write data to the internal storage. On Android devices sometimes it may be necessary to do this manually in the Application settings! (When the StudioXm App is not allowed to write to the internal storage your user specific settings will not be saved, i.e. language and port settings, device names, storing RestorePoints, etc.) Also make sure to allow the App to access your internet connection in case you want to download firmware update files for your device. Note this may produce extra costs when using your mobile data connection!<br />
<br />
To connect your MICROBEAST PLUS, AR7210BX or NANOBEAST with your smartphone/tablet the BLE2SYS bluetooth smart interface is required:
{|class="gallery"
{|class="gallery"
|[[File:Ble2sys.jpg|none|200px]]
|width="180pt" style="padding:10px 20px;" align="center"| [[File:Studiox_macos_error.png|x200px|none]]
|width="180pt" style="padding:10px 20px;" align="center"| [[File:Studiox_macos_open.png|x200px|none]]
|width="180pt" style="padding:10px 20px;" align="center"| [[File:Studiox_macos_open_2.png|x200px|none]]
|width="180pt" style="padding:10px 20px;" align="center"|  [[File:Studiox_macos_install.png|x200px|none]]
|}<br />
|}<br />
<br />
<br />
 
In case your USB2SYS is not displayed in StudioX (Device: "cu.SLAB_USBtoUART") the drivers did not install correctly. Please install the SiLabs CP210x VCP drivers from here:  [https://studiox.beastx.com/download/mac/SiLabsUSBDriverDisk.dmg SiLabs driver package (macOS)].<br />
Connect the BLE2SYS interface to the [SYS] port of your BEASTX device and power it up. Start the StudioXm app. In the selection box your BLE2SYS device should appear automatically. If not click the box and select it. If nothing's there, click the RESCAN button above to search for new devices. This can take from a few seconds up to a few minutes. If the scan process finishes immediately and the box stays empty it is very likely the bluetooth function is switched off on your phone or the app has no rights to access the bluetooth connection. So check your phone settings in this case.<br />
<br />
When your BLE2SYS is still not found check that it is operating properly. The blue LED must flash in short intervals. Note that by default the interface will switch off automatically after 30 seconds. So if you need too long time to initiate connection it may have been disabled. Disconnect it or cylce power and try again. Also note the the device name can be different. By default it's BLE2SYS but it's possible to change the bluetooth id, so maybe it's different. (The automatic deactivation time as well as the bluetooth id can be changed in the configuration menu clicking the SETTING button above the device selection box.)
<br />
<br />
Then click CONNECT to load the data from your device and to enter configuration menus.<br />
<br />
<br />
<br />
<br />
</translate>
</translate>

Latest revision as of 10:30, 10 August 2024

StudioX

1. Download and installation

2. Connections

3. Basic functionality

4. Presets/Backup/Restore/Reset

5. Firmware update

6. StudioX update


StudioX allows to fully configure your MICROBEAST/MICROBEAST PLUS/MICROBEAST ULTRA, Spektrum AR7210BX and NANOBEAST. You can use it to do all the configuration from the computer or smartphone, to backup settings, load preconfigured setups and do a lot more. In addition you can perform some basic adjustments on older devices like MICROBEAST and Spektrum AR7200BX/AR7300BX.

Please make sure to always use the latest version in order to be compatible with latest device firmware updates!




Smartphone/tablet

If not already done, download and install the latest version of StudioXm from the Apple iTunes Store or GooglePlay Store:


Make sure to give the App privileges for using the bluetooth connection and to write data to the internal storage.
With iOS you will be asked to grant privileges at first start up. On Android devices sometimes it may be necessary to do this manually in the application settings! (When the StudioX App is not allowed to write to the internal storage, your user specific settings won't be saved, i.e. language and port settings, device names, storing RestorePoints, etc.) Also make sure to allow the App access your internet connection in case you want to download firmware update files for your device. Note this may produce extra costs when using your mobile data connection!

To connect your BEASTX controller with your smartphone/tablet the BLE2SYS bluetooth smart interface is required. This is plugged into your device's SYS port and is used to establish a wireless communication to the phone.



Windows PC/mac

If not already done you can get StudioX here:

BEASTX website


To connect your BEASTX device to the computer you need one of the following USB interfaces:
BEASTX
USB2SYS interface 		SPEKTRUM
SPMA3030 interface 		RCWARE RX2SIM
Wireless Multi-Sim Adapter
with USB2SYS interface emulation


Since Version 15.7.0 you can also use the BLE2SYS interface for a wireless connection to your BEASTX device (only in combination with macOS or Windows 10/11 64-bit versions!). On the computer side a built-in or external bluetooth module (Bluetooth 5.0 compatible or better) is required. If your computer doesn't have a bluetooth module, you can get cheap bluetooth 5.0 USB sticks from your local hardware store.




Windows installation

The setup procedure is easy and works as usual. After installation of the StudioX software bundle, Windows should install the correct drivers automatically when the USB2SYS / SPMA3030 interface is plugged in the USB port for the first time. When using the RX2SIM Multi-Sim Adapter, drivers should install as soon as it is switched to USB2SYS emulation mode (push button repeatedly until LED lights yellow, see RX2SIM manual). Check the notifications of your Windows system:

noframe
noframe
noframe
noframe



If you did not see any message popping up at all, check you Windows device manager if the interface driver has been installed correctly. To access the device manager under windows type devmgmt.msc in the Startmenu's search bar or simply enter Device manager. You must be able to find following entry:

noframe
noframe
noframe
noframe
The name COM3 may be different on your PC. This entry must disappear when you disconnect the Interface from the PC and re-appear when you connect it again. If there is only an entry marked with an yellow "!" something went wrong and you have to install the driver files manually.


In case the drivers did not install correctly please install the SiLabs CP210x VCP drivers from here: SiLabs driver package (Windows).


macOS installation

When opening the StudioX .pkg file you may get a message that installation is not allowed. In this case please click the .pkg file with the right mouse button. Then choose "Open". Now you will see the similar message but this time you can choose "Open".



In case your USB2SYS is not displayed in StudioX (Device: "cu.SLAB_USBtoUART") the drivers did not install correctly. Please install the SiLabs CP210x VCP drivers from here: SiLabs driver package (macOS).



Retrieved from "https://wiki.beastx.com/index.php?title=StudioXm&oldid=25352"