Main Page: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) |
Shornstein (talk | contribs) |
||
| Line 30: | Line 30: | ||
* [[Servos react somehow "notchy" at high frame rate. Is MICROBEAST damaging my servos?]] | * [[Servos react somehow "notchy" at high frame rate. Is MICROBEAST damaging my servos?]] | ||
* [[Why do the swashplate servos run very slowly when testing on the bench?]] | * [[Why do the swashplate servos run very slowly when testing on the bench?]] | ||
* [[Help:FAQ|Frequently asked questions]] | |||
Revision as of 13:57, 16 December 2013
This wiki is still work in progress, so please be patient.
Thank you!
General Information
How-Tos
- Connect device
- Setup swashplate phasing [All]
- Setup receiver type - Microbeast, Trajectory
- Setup nitro governor [AR7200BX]
Tech stuff
FAQs and troubleshooting
- MICROBEAST does not finish initialization. What can I do?
- The brand new MICROBEAST only shows a red flashing LED or even nothing. What's wrong?
- Helicopter tips over when trying to take off or tilts to one side in flight.
- My servos are getting warm/hot, is this normal?
- Servos react somehow "notchy" at high frame rate. Is MICROBEAST damaging my servos?
- Why do the swashplate servos run very slowly when testing on the bench?