Bureaucrats, Administrators, translate-proofr
15,683
edits
Changes
Jump to navigation
Jump to search
Line 2:
Line 2: − + − Click once on the dropdown menu in the upper right corner of each menu point and it opens. Then select by a second mouse click the required parameters. The value will be immediately activated in Microbeast, there is no further action like saving, etc. necessary. Simply disconnect the unit and go fly.+
no edit summary
Während das Microbeast mit der Microsettings Software verbunden ist, kann am Gerät selbst keine Einstellung vorgenommen werden. Der Drucktaster ist gesperrt. Es kann ganz normal über die Fernsteuerung gesteuert werden, z.B. um bestimmte Einstellungen zu prüfen.
Während das Microbeast mit der Microsettings Software verbunden ist, kann am Gerät selbst keine Einstellung vorgenommen werden. Der Drucktaster ist gesperrt. Es kann ganz normal über die Fernsteuerung gesteuert werden, z.B. um bestimmte Einstellungen zu prüfen.
1) Selecting standard settings instead of selecting the different options in the menu by using the rudder stick you can select the appropriate option by two mouse clicks:
'''1. Einstellen fester Vorgabewerte'''
Anstatt der Auswahl mit dem Hecksteuerknüppel im Menü des Microbeast, lassen sich die einzelnen zur Verfügung stehende Optionen bei den entsprechenden Punkten bequem über das Dropdown Menü in der rechten oberen Ecke auswählen. Einmal kurz auf das Menü klicken und es öffnet sich. Dann durch einen weiteren Mausklick die gewünschte Parametrierung anwählen. Der Wert wird sofort im Microbeast aktiviert, es ist keine weitere Aktion wie speichern o.ä. notwendig.
2) Setting up user defined values: All menu items offer the possibility to apply either the fixed values or to select your own values (in a usefull range) and find your personal adjustment. The possible range of values is visualized by the bars in the display. The individual value(s) can be entered using the input panel(s) on the left (except for the swashplate mixers, here's the stuff in the middle). By clicking the arrow keys up or down, the values can be adjusted in steps of 1. Alternatively, you can also click the panel and directly enter a numeric value (so far as it is within the possible range of values). This value is stored immediately in Microbeast but to also use it, it is necessary, to select "User defined" option instead of fixed the values in the MICROBEAST's menu - either by just using the drop-down menu on the right or (esspecially useful later on the field) directly by using the tail stick to select "LED off" in the menu at the appropriate menu point. For example you can test the new value on the airfield and also change back at any time to a fixed default value or even change between values several times. The custom value itself remains stored in the microprocessor and the computer is only necessary if you want to change it again.
2) Setting up user defined values: All menu items offer the possibility to apply either the fixed values or to select your own values (in a usefull range) and find your personal adjustment. The possible range of values is visualized by the bars in the display. The individual value(s) can be entered using the input panel(s) on the left (except for the swashplate mixers, here's the stuff in the middle). By clicking the arrow keys up or down, the values can be adjusted in steps of 1. Alternatively, you can also click the panel and directly enter a numeric value (so far as it is within the possible range of values). This value is stored immediately in Microbeast but to also use it, it is necessary, to select "User defined" option instead of fixed the values in the MICROBEAST's menu - either by just using the drop-down menu on the right or (esspecially useful later on the field) directly by using the tail stick to select "LED off" in the menu at the appropriate menu point. For example you can test the new value on the airfield and also change back at any time to a fixed default value or even change between values several times. The custom value itself remains stored in the microprocessor and the computer is only necessary if you want to change it again.