StudioX Flow Hilfe

From BEASTX Wiki
Revision as of 15:07, 19 November 2026 by Shornstein (talk | contribs) (Created page with "{{TOC_StudioXFlow/en}} __TOC__ <br />")
Jump to navigation Jump to search


Windows


Connection is lost during firmware update

On some Windows computers StudioX Flow loses the connection to the BEASTX device while a firmware update is being transferred. The update aborts and the device has to be reconnected. In most cases this is caused by the FIFO buffer setting of the virtual COM port (USB interface with Silicon Labs CP210x chip). The buffer seems to hold back or swallow data packets during the update, which interrupts the communication.

Solution: disable the FIFO buffer of the COM port

  1. Disconnect StudioX Flow (or close the app) but leave the USB interface plugged into the computer.
  2. Open the Windows Device Manager (right click on the Windows start button → Device Manager).
  3. Expand Ports (COM & LPT) and look for the COM port of the USB interface. It is usually named Silicon Labs CP210x USB to UART Bridge (COMx).
  4. Double click this entry (or right click → Properties) and open the tab Port Settings.
  5. Click Advanced... and uncheck the option Use FIFO buffers.
  6. Confirm all dialogs with OK, unplug the USB interface and plug it in again.
  7. Restart StudioX Flow and repeat the firmware update.


With the FIFO buffer disabled the connection is stable and firmware updates can be repeated without any interruption. The setting is stored by Windows for this COM port, so it only has to be changed once. If the interface is assigned a different COM port later (e.g. when using another USB socket), the setting may have to be repeated for the new port.