SETUPMENÜ A - Einbaulage

From BEASTX Wiki
Revision as of 15:18, 22 April 2024 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to navigation Jump to search


The BEASTX systems can be mounted in nearly all possible orientations. The only restriction is that the main connection terminal must point in or against flying direction and the egdes of the unit must be parallel to the rotation axis. Please see section Hardware Installation for further illustrations.

Adjustment at the device

At menu point A of SETUP MENU select the orientation that the device is actually mounted on your heli by choosing the suitable Status LED color. You can switch between the options by briefly moving the rudder stick to one or the other direction. The Status-LED will change the color accordingly.

Status-LED Device orientation
off flat - sticker on top side - socket points in flight direction
purple flashing vertical - button is on the top - socket points in flight direction
purple flat inverted - sticker on bottom side - socket points in flight direction
red flashing vertical inverted - button is on the bottom - socket points in flight direction
red flat - sticker on top side - socket points to the tail boom
blue flashing vertical - button is on the top - socket points to the tail boom
blue flat inverted - sticker on bottom side - socket points to the tail boom
red/blue vertical inverted - button is on the bottom - socket points to the tail boom




Setup with StudioX app

At the first screen of heli setup wizard choose the orientation that the device is actually mounted on your heli by choosing the matching type in the app.

<img class="ios" src="freakware%202019-07-09%20030.PNG">