Changes

'''Please note that the electric RPM Governor feature is optional available for MICROBEAST PLUS devices only. Additionaly you must use a [[Manuals:MB_Plus:Receiver_Installation/en#Single-Line_receivers|single-line receiver]]. The RPM Governor function is not applicable when a [[Manuals:MB_Plus:Receiver_Installation/en#Standard_receivers|Standard receiver]] is used!'''<br />

'''Please note that you must use a [[Manuals:MB_Plus:Receiver_Installation/en#Single-Line_receivers|single-line receiver]]. The RPM Governor function is not applicable when a [[Manuals:MB_Plus:Receiver_Installation/en#Standard_receivers|conventional (multi-wire) Standard receiver]] is used!'''<br />

<br />

<br />

<br />

<br />

The Castle Creations ESC offer a special "External Governor" mode to be used with flybarless systems. Anyhow, this mode has an integrated soft start and autorotation bailout function. Therfore we do NOT recommend to use this mode, as MICROBEAST PLUS can do this on its own! Instead we suggest to setup the Castle ESC to a very simple throttle control mode which is offered by using the fixed wing "Airplane" mode as "Vehicle type" in combination with a very fast throttle response:

The Castle Creations ESC offer a special "External Governor" mode to be used with flybarless systems. This mode has an integrated soft start and autorotation bailout function. If your MICROBEAST PLUS/AR7210BX is updated to firmware version 4.2.x or higher you can use this mode, but it is required to disable the soft start feature of the device using the Expert Parameters section in the StudioX Software ([[#Using Firmware Version 4.2.x or higher and "External Governor" mode|see section below for further details]]). '''Otherwise, do not use this mode. By default MICROBEAST PLUS / AR7210BX will do all the motor control logic including initial soft start on its own!''' For this you have to setup the Castle ESC to a very simple throttle control mode which is offered by using the fixed wing "Airplane" mode as "Vehicle type" in combination with a very fast throttle response:

{|

{|

|style="vertical-align:top"|[[File:Talon_01.jpg|200px|thumb]]

|style="vertical-align:top"|[[File:Talon_01.jpg|200px|thumb]]

|[[File:Talon_02.jpg|200px|thumb|Of course we don't need the brake function for Airplanes!]]

|[[File:Talon_02.jpg|200px|thumb|Of course we don't need the brake function for Airplanes!]]

|}

|}

When using a Castle EDGE controllers with the provided rpm signal cable, make sure the "Auxiliary wire mode" is set to "RPM out". Otherwise there will not be any rpm signal on this wire:<br />

When using a Castle EDGE controllers with the provided rpm signal cable, make sure the "Auxiliary wire mode" is set to "RPM out". Otherwise there will not be any rpm signal on this wire:<br />

[[File:Talon_05.jpg|200px]]<br />

[[File:Talon_05.jpg|200px|thumb|left]]

<div style="clear:both;"></div>

<br />

<br />