− | Press the button, but only briefly, to save the setup and switch to [[Manuals:MB_Plus:Receiver_setup_B|Receiver setup menu point '''B''']] (the yellow Menu-LED B will flash) in case you selected a single-line receiver. If the selected receiver type is “Standard” the setup is finished now and briefly pushing the button will complete receiver setup (all LEDs flashing). Channel assignment ([[Manuals:MB_Plus:Receiver_setup_B|Menu point '''B''']] and following) is not necessary and not provided since the allocation takes place by appropriate insertion of the cables into the receiver's servo output ports.</p> | + | Press the button, but only briefly, to save the setup and switch to [[Manuals:MB_Plus:Receiver_setup_menu_B/en|Receiver setup menu point '''B''']] (the yellow Menu-LED B will flash) in case you selected a single-line receiver. If the selected receiver type is “Standard” the setup is finished now and briefly pushing the button will complete receiver setup (all LEDs flashing). Channel assignment ([[Manuals:MB_Plus:Receiver_setup_menu_B/en|Menu point '''B''']] and following) is not necessary and not provided since the allocation takes place by appropriate insertion of the cables into the receiver's servo output ports.</p> |
− | If you have already briefly pressed the button by mistake and it did not change the receiver type but switch to [[Manuals:MB_Plus:Receiver_setup_B|Menu point '''B''']] or end of menu, then simply switch off power and repeat the above procedure. | + | If you have already briefly pressed the button by mistake and it did not change the receiver type but switch to [[Manuals:MB_Plus:Receiver_setup_menu_B/en|Menu point '''B''']] or end of menu, then simply switch off power and repeat the above procedure. |