Changes

<p>

<p>

----

----

Press the button, but only briefly, to save the setup and switch to [[Manuals:MB_Plus:Receiver_setup_B|Receiver setup menu point '''B''']] (the yellow Menu-LED B will flash) in case you selected a single-line receiver. If the selected receiver type is “Standard” the setup is finished now and briefly pushing the button will complete receiver setup (all LEDs flashing). Channel assignment ([[Manuals:MB_Plus:Receiver_setup_B|Menu point '''B''']] and following) is not necessary and not provided since the allocation takes place by appropriate insertion of the cables into the receiver's servo output ports.</p>

Press the button, but only briefly, to save the setup and switch to [[Manuals:MB_Plus:Receiver_setup_menu_B/en|Receiver setup menu point '''B''']] (the yellow Menu-LED B will flash) in case you selected a single-line receiver. If the selected receiver type is “Standard” the setup is finished now and briefly pushing the button will complete receiver setup (all LEDs flashing). Channel assignment ([[Manuals:MB_Plus:Receiver_setup_menu_B/en|Menu point '''B''']] and following) is not necessary and not provided since the allocation takes place by appropriate insertion of the cables into the receiver's servo output ports.</p>

<p>

<p>

If you have already briefly pressed the button by mistake and it did not change the receiver type but switch to [[Manuals:MB_Plus:Receiver_setup_B|Menu point '''B''']] or end of menu, then simply switch off power and repeat the above procedure.

If you have already briefly pressed the button by mistake and it did not change the receiver type but switch to [[Manuals:MB_Plus:Receiver_setup_menu_B/en|Menu point '''B''']] or end of menu, then simply switch off power and repeat the above procedure.

----

----

</p>

</p>

</translate>

</translate>