Changes

===StudioX does not recognize my unit.===

===StudioX does not recognize my device===

''I start the StudioX software and connect my MICROBEAST/AR7200BX to the computer but nothing happens.''

''I start the StudioX software and connect my MICROBEAST/AR7200BX to the computer but nothing happens.''

* On computers with Microsoft Windows operating system first of all make sure you did install the driver files for the USB2SYS interface. These files come with software package when downloading it, but they must be installed separately. Do not plugin the USB2SYS unless you did not install these driver files. Remove the interface if you already plugged it in before installing the files. For further information see the section about [[StudioX|StudioX Installation]].

* On computers with Microsoft Windows operating system first of all make sure you did install the driver files for the USB2SYS interface. These files come with software package when downloading it, but they must be installed separately. Do not plugin the USB2SYS unless you did not install these driver files. Remove the interface if you already plugged it in before installing the files. For further information see the section about [[StudioX|StudioX Installation]].

<br />

<br />

''I connect the USB2SYS to my MICROBEAST/AR7200BX and to the computer but nothing happens except the blue LED lights up on the USB2SYS.''<br />

''I connect the USB2SYS to my MICROBEAST/AR7200BX and to the computer but nothing happens except the blue LED lights up on the USB2SYS.''<br />

When the LED lights up the connection wire is plugged in with wrong polarity! The light on the USB2SYS may only flash sporadically when data is transferred between computer and MICROBEAST unit but it mustn't light up continuously.

When the LED lights up the connection wire is plugged in with wrong polarity! The light on the USB2SYS may only flash sporadically when data is transferred between computer and MICROBEAST unit but it mustn't light up continuously.<br />