Changes

Jump to navigation Jump to search
Importing a new version from external source
Line 157: Line 157:  
<br />
 
<br />
   −
{{QUOTE|'''Note for MICROBEAST/AR7200BX/Ar7300BX (not MICROBEAST PLUS):''' If Parameter menu point '''B''' is set to preset "blue" and the tail gain is switched to heading lock mode you can see in operation mode by the Status LED state at which tail stick position the maximum possible rotation rate on rudder will be reached: At that specific tail stick position the Status LED will start to flash. Moving the stick to this point in flight the rotation rate of the helicopter will be as high as the gyro can control. Increasing the stick throw further the LED will go off. At this point the rate control is switched off and the rudder axis will spin uncontrolled. Here the only limit is the tail pitch throw and normally the tail will spin ultra fast. This can be used for performing tail slides or turns with very fast spinning tail. For normal flying around you should not use this as you may accidentally steer into the uncontrolled area and the tail may spin too fast or very uneven. So please check on the ground that the Status LED will not go off when giving full rudder stick deflection in your default flight modes.}}<br />
+
{{QUOTE|* Note that the rotation rate in first line has nothing to do with your cyclic pitch adjustments at Setup menu points J or L and also has nothing to do with the cyclic pitch when steering cyclic on the ground! Especially when controlling slow rates do not get confused when the system will move the servos to full cyclic deflection. This is normal behavior of the system as the heli when the heli is standing on the ground and can't move. In flight the system will automatically control the pitch as high as necessary to maintain the given rate. So always setup the cyclic pitch as mentioned in the manual and do not rely on what you see when moving the sticks on the ground!<br />
 +
<br />
 +
* If the heli does not flip / roll / rotate fast enough even if you've fully increased the stick throw in the transmitter check the maximum amount of cylic pitch at Setup menu point L and the maximum rudder servo deflection at Setup menu point '''E'''. When the cyclic pitch or tail pitch is not sufficient of course the system can't rotate the heli faster than the pitch allows.}}<br />
    
===The helicopter wobbles on aileron and elevator axis.===
 
===The helicopter wobbles on aileron and elevator axis.===
7,241

edits

Navigation menu