Changes

===The brand new MICROBEAST only shows a red flashing LED, random LED sequence or even nothing. What's wrong?===

===The brand new MICROBEAST only shows a red flashing LED, random LED sequence or even nothing. What's wrong?===

Check very carefully whether all cables are plugged in correctly and all the plugs are connected properly at the correct position (Beast & receiver!). Especially in the vertical direction, not just 2 pins must sit on the header. Also make sure that the polarity is correct on all connections.<br />

Check very carefully that all cables are plugged in correctly and all the plugs are connected properly at the correct position on both MICROBEAST and receiver side. Especially in the vertical direction make sure not just 2 pins sit on the header. Also make sure that the polarity is correct on all connections. Make sure your power supply (BEC or receiver battery) is capable to power all connected devices (servos, receiver, flybarless). When the power drain is too high this can cause a short drop in voltage making the system resart over and over again.<br />

<br />

<br />