7,241
edits
Changes
Jump to navigation
Jump to search
Line 249:
Line 249: − +
Importing a new version from external source
===Status-LED flashes in operation mode, i.e. after landing.===
===Status-LED flashes in operation mode, i.e. after landing.===
The flashing Status-LED shows that a software-reset occurred during operation.
The flashing Status-LED shows that a software-reset occurred during operation. This can have different reasons:
* The receiver power supply does not seem to be sufficient. The voltage during operation dropped in a critical area (<3.5 Volts). Use a stable power supply and make sure that the wiring and plugs are dimensioned big enough and feature low contact resistance. On large helicopters we recommend to use the MICROBEAST PLUS HD or AR7300BX unit with high power input.
* The receiver power supply does not seem to be sufficient. The voltage during operation dropped in a critical area (<3.5 Volts). Use a stable power supply and make sure that the wiring and plugs are dimensioned big enough and feature low contact resistance. On large helicopters we recommend to use the MICROBEAST PLUS HD or AR7300BX unit with high power input.
* A reset can be triggered due to a transfer of high voltage. Take measures to prevent static discharges.<br />
* A reset can be triggered due to a transfer of high voltage. Take measures to prevent static discharges.<br />