7,288
edits
Changes
Jump to navigation
Jump to search
Translations:Help:FAQ:Startup/2/en (view source)
Revision as of 13:15, 27 February 2018
, 6 years agoImporting a new version from external source
=The SPEKTRUM AR7200BX / AR7210BX / AR7300BX does not finish initialization. What can I do?=
Watch the running LED lights during the init phase: If the lights A - G light up the sensor's rest positions are being calibrated, H - N show determining the RC channels and their center positions.<br />
<br />
AR7200BX / AR7300BX: Initially the chase is from A - N. If one step is done the indication light for this step will quit running.<br />
AR7210BX: Initially the chase is from H - N (Stick calibration). Only if this step is finished the chase from A - G (Sensor calibration) will start.<br />
<br />
When LEDs A - G do not quit running
* The sensors register movement and calibration of rest position can not be finished. Make sure the unit/the helicopter does not get moved e.g. by wind gusts or people leaning on your work bench where the heli is standing on.
* Sensors damaged. Return the device for repair.
* Power supply voltage is dropping due to weak power supply or damaged servos.<br />
<br />
When LEDs H - N do not quit running
* Is the transmitter switched on?
* Check whether your transmitter is correctly bound to the system.
* Keep at least 1m/3ft distance between transmitter and receiver<br />
<br />
<br />
Watch the running LED lights during the init phase: If the lights A - G light up the sensor's rest positions are being calibrated, H - N show determining the RC channels and their center positions.<br />
<br />
AR7200BX / AR7300BX: Initially the chase is from A - N. If one step is done the indication light for this step will quit running.<br />
AR7210BX: Initially the chase is from H - N (Stick calibration). Only if this step is finished the chase from A - G (Sensor calibration) will start.<br />
<br />
When LEDs A - G do not quit running
* The sensors register movement and calibration of rest position can not be finished. Make sure the unit/the helicopter does not get moved e.g. by wind gusts or people leaning on your work bench where the heli is standing on.
* Sensors damaged. Return the device for repair.
* Power supply voltage is dropping due to weak power supply or damaged servos.<br />
<br />
When LEDs H - N do not quit running
* Is the transmitter switched on?
* Check whether your transmitter is correctly bound to the system.
* Keep at least 1m/3ft distance between transmitter and receiver<br />
<br />
<br />