Bureaucrats, Administrators, translate-proofr
15,502
edits
Changes
Jump to navigation
Jump to search
Line 4:
Line 4: − <br /> − + + Line 17:
Line 17: + + + + + + + + + + + + + + + + + + + +
no edit summary
{{TOC_StudioXm/en}}
{{TOC_StudioXm/en}}
__TOC__
__TOC__
<br />
<br />
<!--T:2-->
<!--T:2-->
{{MINIQUOTE|Please note that StudioX 3/StudioXm can be used in combination with MICROBEAST PLUS, AR7120BX and NANOBEAST only. For older devices like MICROBEAST, AR7200, AR7300 you must use StudioX Version 2.2.x. Instructions for the old StudioX can be found by [[StudioX/en|clicking here]].}}<br />
{{MINIQUOTE|Please note that StudioX 3/StudioXm can be used in combination with '''MICROBEAST PLUS, AR7120BX and NANOBEAST only'''.}}<br />
For older devices like '''MICROBEAST, AR7200, AR7300 you must use StudioX Version 2.2.x'''. Instructions for the old StudioX can be found by [[StudioX/en|clicking here]].<br />
<br />
<br />
= BLE2SYS Configuration = <!--T:4-->
= BLE2SYS Configuration = <!--T:4-->
When using an iOS or Android smartphone/tablet you can configure the BLE2SYS device by tapping the BLE2SYS button on top of the main window. This will open a configuration screen (or you will be asked to enter the pin code for the bluetooth device first). Also you can configure your BLE2SYS by the help of a PC/mac. In this case you have to connect the BLE2SYS to a USB2SYS computer interface using a Y-harness and powering with a receiver battery over the second line (as shown [[StudioXm/en|earlier]]). Then just click "Connect" and open the com port as you would connect to a BEASTX gyro.<br />
<br />
There are several options you can change for the BLE2SYS bluetooth interface:<br />
<br />
==Device Name==
You can set a custom device name (maximum length 11 digits) by changing the name in the line on top of the screen, i. e. by entering the name of your helicopter. Then this name will be the bluetooth identifier. Please note when chaging the name you may have to restart the StudioX app as well as the BLE2SYS device in order to see the new name in the main window.<br />
<br />
==Automatic deactivation==
Never ever fly your helicopter when the bluetooth device is active! The bluetooth signal is sent on the 2.4GHz band and may interfer with your radio signal. For your convenience you can set an automatic deactivation timeout here, so the device will power off automatically after the given amount of time when no connection is requested. So you can leave the module plugged into your BEASTX device when flying the helicopter and when not using the app. When you set the timeout to 0 the device will be active all time.<br />
<br />
<br />
{{WARNING_QUOTE|'''Warning:''' When you deactivate the timeout never leave your BLE2SYS connected when flying your helicopter! This can lead to radio signal loss and cause severe injury or damage!}}
<br />
<br />
==Change pin code==
If necessary you can change the pin code for connecting to the BLE2SYS. We highly recommend to do this as the default pin "1111" is known to everyone, so it may be very likely that some moron tries to fool you and connects to your device when on the flying field or even when you intend to fly!<br />
<br />
<br />
==Firmware update==
When you are using a computer (PC/mac) to configure your BLE2SYS, you will additionaly see a "Firmware Update" button. So obviously when you click that button you will be able to upload latest firmware updates to your BLE2YS interface (if necessary). The update procedure is not different to any other BEASTX device and is described in the section [[StudioXm:FirmwareUpdate/en|firmware update]].<br />
<br />
</translate>
</translate>