7,273
edits
Changes
Jump to navigation
Jump to search
Translations:Manuals:MBPlusFblV52:Receiver B/3/en (view source)
Revision as of 20:11, 8 April 2022
, 2 years agoImporting a new version from external source
=Adjustment on the device=
If not already done enter RECEIVER MENU and scan your receiver at Menu Point A. Then setup will skip to Menu Point '''B'''.<br />
<br />
{{QUOTE|If the Status-LED lights in '''red color''' this means either there is no valid remote control signal available or that you did try to assign two or more channels to a function. So check if the receiver is connected and powered properly and that you're only moving one channel at a time when trying to do the manual function assignment.}}<br />
<br />
If not already done enter RECEIVER MENU and scan your receiver at Menu Point A. Then setup will skip to Menu Point '''B'''.<br />
<br />
{{QUOTE|If the Status-LED lights in '''red color''' this means either there is no valid remote control signal available or that you did try to assign two or more channels to a function. So check if the receiver is connected and powered properly and that you're only moving one channel at a time when trying to do the manual function assignment.}}<br />
<br />