Bureaucrats, Administrators, translate-proofr
15,502
edits
Changes
Jump to navigation
Jump to search
Line 49:
Line 49: − + − == Single wire without telemetry == Line 84:
Line 83: − + − == Single wire with telemetry ==
Marked this version for translation
<br />
<br />
<!--T:9-->
== Single wire without telemetry == <!--T:9-->
* The single-line connection wire is plugged into the [DI1] input of MICROBEAST PLUS
* The single-line connection wire is plugged into the [DI1] input of MICROBEAST PLUS
* The throttle servo or ESC is connected to the [CH5] output. When using a speed controller with BEC, from here the power will be distributed to receiver and servos.
* The throttle servo or ESC is connected to the [CH5] output. When using a speed controller with BEC, from here the power will be distributed to receiver and servos.
<br />
<br />
<!--T:7-->
== Single wire with telemetry == <!--T:7-->
Receivers with bidirectional telemetry uplink (Spektrum® SRXL2 & Jeti® EXBUS) must be connected to the pin board at the side of MICROBEAST PLUS. To connect a receiver with standard servo connectors, i.e. the SPEKTRUM® '''AR6610T''', '''AR8020T''' or JETI EXBUS receivers, you need an adapter from servo plug to JST-ZH type. We offer a special adapter if needed - Order nr. BXA76403. Voltage is the first pin from the left, Signal is connected at the third pin from the left. Minus is the second pin from the front/right.<br />
Receivers with bidirectional telemetry uplink (Spektrum® SRXL2 & Jeti® EXBUS) must be connected to the pin board at the side of MICROBEAST PLUS. To connect a receiver with standard servo connectors, i.e. the SPEKTRUM® '''AR6610T''', '''AR8020T''' or JETI EXBUS receivers, you need an adapter from servo plug to JST-ZH type. We offer a special adapter if needed - Order nr. BXA76403. Voltage is the first pin from the left, Signal is connected at the third pin from the left. Minus is the second pin from the front/right.<br />
* When '''telemetry is not in use''', the throttle servo or ESC is connected to the '''[AIL|CH5]''' port.
* When '''telemetry is not in use''', the throttle servo or ESC is connected to the '''[AIL|CH5]''' port.