Changes

StudioX allows to fully configure your MICROBEAST/MICROBEAST PLUS/MICROBEAST ULTRA, Spektrum AR7210BX and NANOBEAST. You can use it to do all the configuration from the computer or smartphone, to backup settings, load preconfigured setups and do a lot more. In addition you can perform some basic adjustments on older devices like MICROBEAST and Spektrum AR7200BX/AR7300BX.<br />

StudioX allows to fully configure your MICROBEAST/MICROBEAST PLUS/MICROBEAST ULTRA, Spektrum AR7210BX and NANOBEAST. You can use it to do all the configuration from the computer or smartphone, to backup settings, load preconfigured setups and do a lot more. In addition you can perform some basic adjustments on older devices like MICROBEAST and Spektrum AR7200BX/AR7300BX.<br />

<br />

<br />

<br />

<br />

= Windows PC/mac =

= Windows PC/mac =

If not already done you can get StudioX here:<br />

If not already done you can get StudioX here:<br />

<br />

<br />

==Windows installation==

==Windows installation==

The setup procedure is easy and works as usual. On (older) Windows systems you may get a note that vcredist_x86.exe is missing on your computer. In this case please install the <b>Microsoft Visual C++ 2019 Redistributable Package</b> (even if you have installed any Microsoft Visual C++ package on you computer you may need this specific version!). The file is included in the StudioX installation folder. Also you can download the latest Microsoft Visual C++ runtime environment from Microsoft directly:<br />

The setup procedure is easy and works as usual. After installation of the StudioX software bundle, Windows should install the correct drivers automatically when the USB2SYS / SPMA3030 interface is plugged in the USB port for the first time. When using the RX2SIM Multi-Sim Adapter, drivers should install as soon as it is switched to USB2SYS emulation mode (push button repeatedly until LED lights yellow, see RX2SIM manual). Check the notifications of your Windows system:

 

After installation of the StudioX software bundle, Windows should install the correct drivers automatically when the USB2SYS / SPMA3030 interface is plugged in the USB port for the first time. When using the RX2SIM Multi-Sim Adapter, drivers should install as soon as it is switched to USB2SYS emulation mode (push button repeatedly until LED lights yellow, see RX2SIM manual). Check the notifications of your Windows system:

{|class="gallery"

{|class="gallery"

|[[File:Driver install.png|x50px|noframe|none]]

|[[File:Driver install.png|x50px|noframe|none]]

|}

|}

<br />

<br />

In case the drivers did not install correctly please see the [[USB2SYS/SPMA3030_driver_installation/en|USB2SYS driver installation guide]].<br />

In case the drivers did not install correctly please install the SiLabs CP210x VCP drivers from here: [https://studiox.beastx.com/download/win/CP210x_VCP_Windows.zip SiLabs driver package (Windows)]].<br />

<br />

<br />

<br />

<br />

==macOS installation==

==macOS installation==

When opening the StudioX .pkg file you may get a message that installation is not allowed. In this case please click the .pkg file with the '''right mouse button'''. Then choose "Open". Now you will see the similar message but this time you can choose "Open".

When opening the StudioX .pkg file you may get a message that installation is not allowed. In this case please click the .pkg file with the '''right mouse button'''. Then choose "Open". Now you will see the similar message but this time you can choose "Open".

|width="180pt" style="padding:10px 20px;" align="center"|  [[File:Studiox_macos_install.png|x200px|none]]

|width="180pt" style="padding:10px 20px;" align="center"|  [[File:Studiox_macos_install.png|x200px|none]]

|}<br />

|}<br />

<br />

<br />

<br />

<br />