7,241
edits
Changes
Jump to navigation
Jump to search
Line 47:
Line 47: − <br /> Line 56:
Line 55: + − '''Binding procedure for Spektrum® remote satellites''' + Line 69:
Line 69: − {|cellspacing="20" − |[[File:Spektrum_bind_v5.png|x400px]] − |}
Manuals:MBUltraFblV5:Radio Setup/en (view source)
Revision as of 10:37, 6 November 2023
, 6 months agoUpdating to match new version of source page
</p>
</p>
{{QUOTE|[[File:Warning.png|18px|sub]] '''Make sure that the motor in electric models can not start when doing the adjustment work!''' If the drive battery is used as power supply for receiver, servos and MICROBEAST ULTRA disconnect the motor from the ESC.}}<br />
{{QUOTE|[[File:Warning.png|18px|sub]] '''Make sure that the motor in electric models can not start when doing the adjustment work!''' If the drive battery is used as power supply for receiver, servos and MICROBEAST ULTRA disconnect the motor from the ESC.}}<br />
<br />
<br />
In case of using a single Spektrum® remote DSM2/DSMX satellite receiver directly connected to MICROBEAST ULTRA, you must bind the receiver by the aid of MICROBEAST ULTRA. Here we have no other option to enable binding procedure at the receiver. '''Please note that it is very important to bind the receiver first before programming MICROBEAST ULTRA and this step must be performed, even if the satellite was already in use and already bound to the transmitter earlier''' (e. g. in connection with a Spektrum® main receiver unit).</p>
In case of using a single Spektrum® remote DSM2/DSMX satellite receiver directly connected to MICROBEAST ULTRA, you must bind the receiver by the aid of MICROBEAST ULTRA. Here we have no other option to enable binding procedure at the receiver. '''Please note that it is very important to bind the receiver first before programming MICROBEAST ULTRA and this step must be performed, even if the satellite was already in use and already bound to the transmitter earlier''' (e. g. in connection with a Spektrum® main receiver unit).</p>
<p> </p>
<p> </p>
<br />
=Bind procedure Spektrum® DSMX satellite=
<p>
<p>
* Insert a Spektrum® “Bind Plug” at the [SYS] port of MICROBEAST ULTRA.
* Insert a Spektrum® “Bind Plug” at the [SYS] port of MICROBEAST ULTRA.
<br />
<br />
After successful binding procedure the receiver‘s LED will stay solid. LED '''H''' respectively '''N''' flash alternately to all other LEDs for 2 seconds, then MICROBEAST ULTRA will restart. Cycle power and enter receiver setup menu as further setup steps may be required to use this type of receiver. Remove the bind plug and proceed with the setup as described in the following of this manual.</p>
After successful binding procedure the receiver‘s LED will stay solid. LED '''H''' respectively '''N''' flash alternately to all other LEDs for 2 seconds, then MICROBEAST ULTRA will restart. Cycle power and enter receiver setup menu as further setup steps may be required to use this type of receiver. Remove the bind plug and proceed with the setup as described in the following of this manual.</p>
<p>
<p>
'''Note:'''
'''Note:'''