Changes

|-

|-

! style="width: 250px; background-color: #f4bf9e"  | DI1 / IO1

! style="width: 250px; background-color: #f4bf9e"  | DI1 / IO1

! style="width: 250px; background-color: #f4bf9e"  | SYS

! style="width: 200px; background-color: #f4bf9e"  | SYS

! style="width: 250px; background-color: #f4bf9e"  | SAT

! style="width: 250px; background-color: #f4bf9e"  | SAT

! style="width: 250px; background-color: #f4bf9e"  | DI2

! style="width: 250px; background-color: #f4bf9e"  | DI2

<br />

<br />

For the ELRS settings in the radio we recommend using the D500 Wide mode or 333Hz Full mode. Note that only in "FullRes" mode all channels have full resolution. When using channels 6 and above only  for controling the ESC, gyro and similar control functions, the "Wide mode" should be OK as well. (Please note that CH5 is not available as this is used as binary switch channel!). We mostly use D500 mode which is working very well. The BX devices can even use the 1000Hz mode but we do not recommend this mode due to restricted radio range and lack of safety options. Also this will not give any benefit when driving servos at a much slower rate.

For the ELRS settings in the radio we recommend using the D500 Wide mode or 333Hz Full mode. Note that only in "FullRes" mode all channels have full resolution. When using channels 6 and above only  for controling the ESC, gyro and similar control functions, the "Wide mode" should be OK as well. (Please note that CH5 is not available as this is used as binary switch channel!). We mostly use D500 mode which is working very well. The BX devices can even use the 1000Hz mode but we do not recommend this mode due to restricted radio range and lack of safety options. Also this will not give any benefit when driving servos at a much slower rate.<br />

<br />

<br />

(Picture sys adapter!)<br />

(Picture sys adapter!)<br />

<br />

<br />

</translate>

</translate>