Bureaucrats, Administrators, translate-proofr
15,502
edits
Changes
Jump to navigation
Jump to search
Created page with "<translate> <!--T:1--> {{DISPLAYTITLE:SETUP MENU C - Rudder pulse width|noerror}} {{TOC_BXFbl|Manuals:BXFbl:Setupmenu_B/en|Manuals:BXFbl:Setupmenu_D/en|SETUPMENU|}} __TOC__ <b..."
<translate>
<!--T:1-->
{{DISPLAYTITLE:SETUP MENU C - Rudder pulse width|noerror}}
{{TOC_BXFbl|Manuals:BXFbl:Setupmenu_B/en|Manuals:BXFbl:Setupmenu_D/en|SETUPMENU|}}
__TOC__
<br />
<!--T:2-->
At Setup menu point '''C''' you can change the pulse with of the rudder servo channel. Usually servos use a pulse width of 1500 to 1520 µs to move to center position, 1000 µs to move to one side and 2000 µs to move to the other. In order to speed things up some engineers had the idea of reducing the pulse, so you can send more pulses and thus more control commands to the servos within a given time. Especially on the rudder this can be useful to increase gyro performance. So some manufacturers released special rudder gyro servos with a reduced pulse of 760µs (half of the usual pulse width). And then there were others that invented servos with center at 960µs which is not so common nowadays. No matter which servo you're using, with BEASTX you can use any of them.<br />
<br />
'''Notes:'''
As mentioned mostly all servos run at 1500 to 1520 µs. So please use 1520µs center pulse if you don't know the pulse of your servo. Also if your servos is rated 1500, use the 1520 setting. It doesn't matter, practically it's the same.<br />
Usually the pulse width will be printed on the servo housing or the packaging, if it's a special 760µs servo or 960µs servo. Or it will say something like "Super Special Rudder Servo".<br />
<br />
[[Image:Xservo_980.png|x150px|none]]<br />
<br />
Also you can find out pulse width easily by testing the different settings. A 1520µs servo will not run properly when using 760µs and vice versa. It will only run into one direction or it will not run at all and feel powerless.
<br />
<br />
=Adjustment on the device= <!--T:5-->
To select the rudder servo pulse width move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point '''C''':<br />
<br />
{{TABLEV5|Rudder servo pulse width|760 µs|960 µs| 1500 / 1520 µs}}<br />
<br />
<br />
=Setup with StudioX app= <!--T:7-->
Choose a preset pulse width by clicking one of the provided buttons for menu point C (Rudder pulse width) or set a custom frequency by directly changing the value with the dial or buttons.<br />
<br />
<div class="iosgallery">
<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20032.PNG">
<div class="iostext"></div>
</div>
<br />
<br />
<br />
</translate>
<!--T:1-->
{{DISPLAYTITLE:SETUP MENU C - Rudder pulse width|noerror}}
{{TOC_BXFbl|Manuals:BXFbl:Setupmenu_B/en|Manuals:BXFbl:Setupmenu_D/en|SETUPMENU|}}
__TOC__
<br />
<!--T:2-->
At Setup menu point '''C''' you can change the pulse with of the rudder servo channel. Usually servos use a pulse width of 1500 to 1520 µs to move to center position, 1000 µs to move to one side and 2000 µs to move to the other. In order to speed things up some engineers had the idea of reducing the pulse, so you can send more pulses and thus more control commands to the servos within a given time. Especially on the rudder this can be useful to increase gyro performance. So some manufacturers released special rudder gyro servos with a reduced pulse of 760µs (half of the usual pulse width). And then there were others that invented servos with center at 960µs which is not so common nowadays. No matter which servo you're using, with BEASTX you can use any of them.<br />
<br />
'''Notes:'''
As mentioned mostly all servos run at 1500 to 1520 µs. So please use 1520µs center pulse if you don't know the pulse of your servo. Also if your servos is rated 1500, use the 1520 setting. It doesn't matter, practically it's the same.<br />
Usually the pulse width will be printed on the servo housing or the packaging, if it's a special 760µs servo or 960µs servo. Or it will say something like "Super Special Rudder Servo".<br />
<br />
[[Image:Xservo_980.png|x150px|none]]<br />
<br />
Also you can find out pulse width easily by testing the different settings. A 1520µs servo will not run properly when using 760µs and vice versa. It will only run into one direction or it will not run at all and feel powerless.
<br />
<br />
=Adjustment on the device= <!--T:5-->
To select the rudder servo pulse width move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point '''C''':<br />
<br />
{{TABLEV5|Rudder servo pulse width|760 µs|960 µs| 1500 / 1520 µs}}<br />
<br />
<br />
=Setup with StudioX app= <!--T:7-->
Choose a preset pulse width by clicking one of the provided buttons for menu point C (Rudder pulse width) or set a custom frequency by directly changing the value with the dial or buttons.<br />
<br />
<div class="iosgallery">
<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20032.PNG">
<div class="iostext"></div>
</div>
<br />
<br />
<br />
</translate>