− | * When using a scale helicopter with 90 degrees eCCPM, you can connect a second elevator servo to [CH6] output on the MICROBEAST PLUS / ULTRA. Note that [CH6] is only a signal output, so you must power the servo from elsewhere, i.e. by getting power from the [SYS]-port using a Y-adapter (for + and - only!). Anyhow, with large scale helicopters we recommend to use a separate power distribution unit to which you connect the servos. This will be the better option in regards to robust and fail safe power distribution.<br /> | + | * Wenn Du einen Scale-Hubschrauber mit 90 Grad eCCPM verwendest, kannst Du ein zweites Höhenruder-Servo an den Ausgang [CH6] des MICROBEAST PLUS / ULTRA anschließen. Beachte, dass [CH6] nur ein Signalausgang ist. Du musst das Servo daher anderweitig mit Strom versorgen, z. B. indem Du den Strom vom [SYS]-Port mit einem Y-Adapter (nur für + und -) beziehst. Wir empfehlen bei großen Scale-Hubschraubern die Verwendung einer separaten Servoweiche, an die Du die Servos anschließt. Dies ist die beste Option im Hinblick auf eine robuste und sichere Stromverteilung.<br /> |