Changes

=Setup with StudioX app= <!--T:5-->

=Setup with StudioX app= <!--T:5-->

Choose a preset frequency by clicking one of the provided buttons for Menu Point D (Rudder frequency) or set a custom frequency by directly changing the value with the dial or buttons. Using a custom frequency you can go up to 400Hz frame rate for rudder servos with standard pulse width of 1500/1520µs. Usually this is plenty enough even for the fastest servos on the market. Going higher is not possible due to technical reasons (the servo pulse at maximum deflection would not fit into the frame properly!). If you want to get top notch performance, we recommend using a servo with 760µs pulse width. This allows frequencies up to 600Hz.<br />

Choose a preset frequency by clicking one of the provided buttons for Menu Point D (Rudder servo update rate) or set a custom frequency by directly changing the value with the dial or buttons. Using a custom frequency you can go up to 400Hz frame rate for rudder servos with standard pulse width of 1500/1520µs. Usually this is plenty enough even for the fastest servos on the market. Going higher is not possible due to technical reasons (the servo pulse at maximum deflection would not fit into the frame properly!). If you want to get top notch performance, we recommend using a servo with 760µs pulse width. This allows frequencies up to 600Hz.<br />

<br />

<br />

<div class="iosgallery">

<div class="iosgallery">